KEC KT-LCD3 - PAS Ratio (or Handlebar) Gear Switch; Power Assistant Push Function

ELECTRIC BICYCLE METER KT—LCD3 Product User Manual
- 12 -
○ PAS Ratio (or Handlebar) Gear Switch
Under normal operation, hold button (UP) or button (DOWN) to
switch the power assist ratio (or handlebar) gear (ASSIST), changing motor output power.
Switching range is 1-5 gear (this can also be configured according to the customer
requirements), gear 1 is for the lowest power, and gear 5 is for the highest power.
At every startup, the meter will automatically restore gear (this can also be
configured as required by users) when it was at last shut down. When the power
assist ratio is gear 0 zero, there’s no power assist function.
○ Power Assistant Push Function
Users can use 6Km/H power assist function when pushing vehicles. Hold
button (DOWN), the meter assist function logo ( ) flashes, the vehicle drives at the speed
of no more than 6Km/h. Release button (DOWN), the assist function will be
revoked.