KEC KT-LCD3 - C10 Automatically Restore Default Setting Mode

ELECTRIC BICYCLE METER KT—LCD3 Product User Manual
- 29 -
parameter column flashes.
C8 parameter setting interface
C8 is motor operating temperature display mode. The setting range is 0 or 1, hold
button (UP) or button (DOWN) shortly for selection.
C8 parameter definition table：
C8 value
Motor operating temperature
0
Function off
1
Function on
Please Note：The motor operating temperature display requires installing temperature
sensor in the motor, output temperature detection signal simultaneously.
After finishing C8 parameter setting, hold button (SW) shortly to save the
current set values and enter C9 parameter setting interface.
○ C9 Startup Password Setting Mode
Enter C9 parameter setting interface after C8 parameter setting is finished, C9
parameter column flashes.
C9 parameter setting interface
C9 is meter power-on password setting mode. The default value is 0, hold