ELECTRIC BICYCLE METER KT—LCD3 Product User Manual
- 37 -
Interface of finishing parameter copy
Please note: Both C9 power-on password and C11 meter attributes can’t be copied.
Besides, LCD3 meter can only copy parameter of the same meter model.
User Setting Note
After entering the user setting environment, if there’s no button operation on the data
for more than 1 minute, the meter will automatically return to display1, and the new set
parameters won’t be saved.
The factory parameter set value and the default value of the meter can be set
according to user requirements, the meter parameter can be restored by using "C10
automatically restore factory setting mode" approach when adjusting it.
Version Information
KT_LCD3_V2.0
Released on October 20, 2014
To Previous Page
Loading...