Need help?Do you have a question about the KEC KT-LCD3 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Voltage | 24V/36V/48V |
| Handlebar size for Holding | 22.2 mm |
| Waterproof Rating | IP65 |
| Operating Temperature | -20°C to 60°C |
| Storage Temperature | -30°C to 70°C |
Instructions and diagrams for installing the meter on 31.8mm handlebars.
Instructions and diagrams for installing the meter on 22.2mm handlebars.
How error codes are shown when system malfunctions occur.
Accessing and modifying user-configurable parameters for the meter.
Step-by-step guide on powering the meter and vehicle on and off.
Explanation of fault codes shown on the meter and their meanings.
Initial configuration settings for the meter's operation.
Accessing and modifying the 'P' parameter group for advanced settings.
Accessing and modifying the 'C' parameter group for advanced settings.
Setting motor characteristic parameters (P1).
Selecting power assist sensor type and parameters (C1).
To Next Page