ELECTRIC BICYCLE METER KT—LCD3 Product User Manual
- 33 -
C12 parameter setting interface
C12 is controller minimum operating voltage adjustment mode (tiny adjustment of
voltage shortage). The default value is 4, and the setting range is 0-7, hold button
(UP) or button (DOWN) shortly for selection.
C12 parameter definition table：
C12 default value is 4, namely, controller minimum operating voltage (voltage
shortage value); when setting is 5, the default value plus 0.5V, when setting is 4, the
default value minus 0.5Vand so on.
To Next Page
Loading...