Configuration – Using the web-based configuration interface
57
Video
• Video Resolution: Select from one of the three resolutions. Higher values provide better quality but at the expense of higher bandwidth
requirements on your network or internet connection.
• Compression Rate: Select a compression rate. Higher rates of compression will reduce network load at the expense of lower image quality.
• Frame Rate (Frames/Sec.): Select the number of frames per second you would like for your video. Higher rates provide smoother video but
require more bandwidth on your network or internet connection.
• Brightness Control: Allows you to control the brightness level. Enter a value between 1 and 128.
• Contrast Control: Allows you to control the contrast level. Enter a value between 1 and 128.
• Saturation Control: Allows you to control the saturation level. Enter a value between 1 and 128.
• Light Frequency: Select the correct frequency (50Hz/60Hz) to reduce the amount of flicker.
• Mirror: Choose whether to mirror the image horizontally or vertically.
• Anti-Flicker: Check the box to enable anti-flicker.
To Next Page
Loading...
Need help?
General