Keebox IPC1000W User Manual

KView Software
81
To add a camera:
1. Click the Configuration icon to view the Camera Setup menu. At the top of the Camera management tab, Click the Add Camera by IP/URL.
2. If you know the IP or URL of the camera, enter it in the field on the Input the location of camera tab and then enter the port number. Enter
the username and password on the right side of the screen and click Ok, add this camera. If you do not know the IP address or URL of the
camera, click the Select a camera in LAN tab and select the camera from the list. Enter the username and password for the camera on the
right side of the screen and click Ok, add this camera.

Keebox IPC1000W Specifications

General

Brand	Keebox
Model	IPC1000W
Category	IP Camera
Language	English