Keithley 2000 Repair Manual

Instrument re-assembly
Re-assemble the instrument by reversing the previous disassembly procedures. Make sure
that all parts are properly seated and secured and that all connections are properly made. To en-
sure proper operation, replace and securely fasten the shield.
WARNING To ensure continued protection against electrical shock, verify that power line ground (green
and yellow wire attached to the power module) and the power transformer ground (black
wire) are connected to the chassis.
3-12 Disassembly

Keithley 2000 Specifications

General

Digits	6.5
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Resistance Range	100 Ω to 100 MΩ
Connectivity	IEEE-488 (GPIB)
Display Type	VFD