1
Safety Precautions
The following safety precautions should be observed be-
fore using this product and any associated instrumenta-
tion. Although some instruments and accessories would
normally be used with non-hazardous voltages, there are
situations where hazardous conditions may be present.
This product is intended for use by qualified personnel
who recognize shock hazards and are familiar with the
safety precautions required to avoid possible injury. Read
the operating information carefully before using the
product.
The types of product users are:
Responsible body
is the individual or group responsible
for the use and maintenance of equipment, for ensuring
that the equipment is operated within its specifications
and operating limits, and for ensuring that operators are
adequately trained.
Operators
use the product for its intended function. They
must be trained in electrical safety procedures and proper
use of the instrument. They must be protected from elec-
tric shock and contact with hazardous live circuits.
Maintenance personnel
perform routine procedures on
the product to keep it operating, for example, setting the
line voltage or replacing consumable materials.
Maintenance procedures are described in the manual.
The procedures explicitly state if the operator may
perform them. Otherwise, they should be performed only
by service personnel.
Service personnel
are trained to work on live circuits, and
perform safe installations and repairs of products. Only
properly trained service personnel may perform installa-
tion and service procedures.
Exercise extreme caution when a shock hazard is present.
Lethal voltage may be present on cable connector jacks or
2000-903-01A Page 1 Thursday, December 23, 1999 7:52 AM
To Next Page
Loading...
Need help?
General
