In this section:
Introduction .............................................................................. 4-1
Equipment required for this example ........................................ 4-1
Device connections .................................................................. 4-2
Basic front-panel measurements .............................................. 4-3
Introduction
This example application makes a 2-wire resistance measurement using the front panel of the
instrument.
Set the function before making other instrument settings. Many of the settings are related to a
specific measure function. The applications in this manual use the order of operations to produce the
best results.
Equipment required for this example
Equipment required to perform this test:
• Model DMM7510
• Two insulated banana cables (you can use the Model 1756 Standard Test Lead Kit that is
provided with the Model DMM7510, or equivalent)
• One resistor to test; the example uses a resistor with a 9.75 kΩ rating
Section 4
Making basic front-panel measurements
北京海洋兴业科技股份有限公司（证券代码：839145）
To Next Page
Loading...
Need help?
General
