Keithley SourceMeter 2612 User Manual

2600-900-01 Rev. A / May 2006 3
Section Figure Title Page
1 Front Panel Operation
Figure 1-1 Series 2600 front panels 1-3
Figure 1-2 Series 2600 rear panels ................................................................. 1-6
Figure 1-3 DUT connections to 10kΩ resistor ............................................... 1-12
Figure 1-4 Interlock circuit ............................................................................. 1-13
Figure 1-5 Display modes.............................................................................. 1-14
Figure 1-6 Buffer display format .................................................................... 1-17
2 Remote Operation
Figure 2-1 GPIB cable ..................................................................................... 2-2
Figure 2-2 RS-232 cable ................................................................................. 2-2
Figure 2-3 Test Script Builder initial startup screen ......................................... 2-6
Figure 2-4 Instrument console control icons.................................................... 2-7
Figure 2-5 Select Instrument Resource dialog box ......................................... 2-8
Figure 2-6 Source-measure command sequence in console window .......... 2-11
Figure 2-7 LabVIEW source-measure example block diagram ..................... 2-13
Figure 2-8 Visual Basic example user interface ............................................ 2-14
Figure 2-9 Example program test results....................................................... 2-17
List of Illustrations

Keithley SourceMeter 2612 Specifications

General

Model	2612
Type	SourceMeter
Channels	2
Measurement Resolution	6.5 digits
Power Output	100 W
Current Source Range	±3 A
Maximum Power	100W
Voltage Measurement Resolution	100 nV (6.5 digits)
Current Measurement Resolution	10pA
Interface	GPIB, USB, Ethernet