Kemper VacuFil Compact - Mounting the Push Handle

EN
1502872-02 - 72 -
5.1 Mounting the push handle
Fig. 18: Mounting the push handle
Pos.
Description
Pos.
Description
1
Push handle
3
Thread M4
2
Screws M4 (6 x)
Tab. 21: Mounting the push handle
Mount the push handle as follows:
1. Screw the push handle (Pos. 1) with the screws (Pos. 2) to the threads
(Pos. 3) provided on the product.
DANGER
Danger of falling or damage to the product!
The push handle (Pos. 1) is only used to push/pull the product.
• Never lift the product by the push handle!