EN
1502872-02 - 76 -
Digital LED display (Pos. 5)
The digital LED display indicates all settings, parameters and performance
values, as well as possible faults and information.
The digital LED display shows [- - -] when switched off.
Rotary switch – Switching the product on/off (Pos. 6)
The rotary switch is used for all menu queries and settings.
• Turn = select, enter
• Press = confirm, acknowledge
As soon as the rotary switch (Pos. 6) is briefly pressed, the product starts
and regulates to the last set extraction capacity. Pressing the rotary switch
again switches the product off.
After the start-up process, the desired extraction capacity can be set as
desired on the rotary switch (Pos. 6).
6.2.1 Menu – Queries and settings
As soon as the rotary switch (Pos. 6) is pressed for approx. 3 seconds, the
setting and query menu is opened. The LED signal lamp (Pos. 4) lights up
white.
In the menu, it is possible to switch between the menu items by turning
the rotary switch (Pos. 6). Briefly press to display the value of the respective
menu item.
To Next Page
Loading...
