82310, 82311, 82312, 82360, 82361, 82362 (if necessary, different
item numbers for other product variants)
This product is developed, designed and manufactured in
accordance with EC directives
2006/42/EC – Machinery Directive
The product continues to comply with the provisions of the
2014/30/EU - EMC Directive
2014/29/EU - Pressure Equipment Directive
2014/35/EU - Low Voltage Directive
At the sole responsibility of
The following harmonised standards are used:
EN ISO 12100:2010 Safety of machinery - General principles for design
EN ISO 13857:2019 Safety of machinery - Safety distances
EN ISO 13854:2019 Safety of machinery - Minimum gaps
EN ISO 4414:2010 fluid power - General rules and safety requirements for systems and
their components
EN ISO 21904-1:2020 Health and safety in welding and allied processes
EN IEC 61000-6-2:2019 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards -
Immunity standard for industrial environments
EN IEC 61000-6-4:2019 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards -
Emission standard for industrial environments
EN 60204-1:2018 Safety of machinery - Electrical equipment of machines
EN ISO 13849-1:2015 Safety of machinery - Safety-related parts of control systems
A complete list of standards, directives and specifications applied is available from the
manufacturer. The operating manual belonging to the product is available.
Additional information:
If it is not used for as intended or the design is altered, the Declaration of Conformity
expires, unless confirmed in writing by us as manufacturers.
To Next Page
Loading...
