5. Remove the dust collection container (Pos. 3) from the product and
carefully place it in the disposal bag without stirring up dust.
6. Seal the disposal bag airtight and dispose of it according to the
applicable regulations.
7. Insert the new dust collection container (Pos. 1) into the product and
close the maintenance cover (Pos. 2) with the knurled screws (Pos. 3).
8. Put the product back into operation. (see also “Commissioning” chapter)
7.2.2 Filter mat replacement, motor cooling
Depending on the use, but at least once a month, the filter mat for fan
cooling must be replaced.
To Next Page
Loading...
