EN
1. INTRODUCTION
1.1 GENERAL
Congratulations on choosing the FastMig Pulse welding equipment. Used correctly, Kemppi
products can signicantly increase the productivity of your welding, and provide years of
economical service.
This operating manual contains important information on the use, maintenance and safety of
your Kemppi product. The technical specications of the equipment can be found at the end
of the manual.
Please read the manual carefully before using the equipment for the rst time. For your
own safety and that of your working environment, pay particular attention to the safety
instructions in the manual.
For more information on Kemppi products, contact Kemppi Oy, consult an authorised Kemppi
dealer, or visit the Kemppi web site at www.kemppi.com.
The specications presented in this manual are subject to change without prior notice.
Important notes
Items in the manual that require particular attention in order to minimise damage and
personal harm are indicated with the ’NOTE!’ notation. Read these sections carefully and follow
their instructions.
1.2 ABOUT FASTMIG PULSE PRODUCTS
FastMig™ Pulse 350 and 450 are CC/CV welding power sources designed for demanding
professional use. They are suitable for synergic Pulsed MIG/MAG, synergic 1-MIG/MAG, basic
MIG/MAG and MMA welding in DC current when connected to FastMig MXF wire feeding
units. P65 setup panel is included in the delivery for selecting, setting and managing the
welding system prior to and during system use.
FastMig Pulse 350/450 product range oers both technical and commercial welding solutions
matching a wide range of applications from sheet metal fabrication to heavy industry
segments. Innovative distance wire feeding solutions are also available for use with this
product, including SuperSnake GT02S/GT02SW.
Disclaimer
While every eort has been made to ensure that the information contained in this guide
is accurate and complete, no liability can be accepted for any errors or omissions. Kemppi
reserves the right to change the specication of the product described at any time without
prior notice. Do not copy, record, reproduce or transmit the contents of this guide without
prior permission from Kemppi.
3
FastMig Pulse 350, 450 / © Kemppi Oy / 1110
To Next Page
Loading...
Need help?
General
