Kemppi MinarcTig 180MLP - Technical Data

3
Technical data
Mains voltage 1 ~230 V ±15%, 50 / 60 Hz
TIG
MMA
Max. 6,7 kVA (180 A / 17,2 V)
Max. 7,0 kVA (140 A / 25,6 V)
180 A / 17,2 V
120 A / 14,8 V
140 A / 25,6 V
100 A / 24 V
Supply current, I1max TIG
MMA
29 A (180 A/17,2 V)
31 A (140 A/25,6 V)
Fuse 16 A delayed
TIG 35 % ED 180 A/17,2 V
100 % ED 120 A/14,8 V
MMA 35 % ED 140 A/25,6 V
100 % ED 100 A/24 V
Welding range TIG
MMA
5 A/10,2 V-180 A/17,2 V
10 A/20,4 V-140 A/25,6 V
Idle Power TIG
MMA
-
25 W
MMA welding electrodes MMA Ø1,5-3,25 mm
Load capacity
Supply current, I1eff TIG
MMA
18 A (120 A/14,8 V)
22 A (100 A/24,0 V)
Connection cable / fuse 3 x 2,5 mm² - 3 m Euro Schuko
Open circuit voltage 95 V
Power ratio at max. current TIG / MMA 0,62 / 0,63
Efficiency at max. current TIG / MMA 0,75 / 0,81
Spark voltage 7-13 kV
External dimensions(L x W x
H)
(400 x 180 x 340) mm
Weight 7,8 kg (8,4 kg with supply cable)
Degree of protection IP 23 C
Operating temperature range - 20 °C…+ 40 °C
Recommended generator > 7 kVA
TIG 35 % ED
100 % ED
MMA 35 % ED
100 % ED
Rated power
Load capacity