Kenwood DMX7522DABS User Manual

Digital Radio (DAB)Digital Radio (DAB)
Selecting a service on the list
You can obtain information on service or select a
service to listen to.
1 Display the <Service List> screen.
On the source control screen, touch as follows:
2 Select receive mode.
• Touch [A–Z] to display the <A–Z Search>
screen. Then, select the initial to start searching.
To search with non-alphabetical characters,
touch [#].
• Touch and hold [ ] to update the service list.
[TI] (For RDS features)
Activates TI Standby Reception
mode.
• When TI is activated, the unit
is ready to switch to Traffic
Information if available. The TI
indicator lights up in white.
• If the TI indicator lights up in
orange, tune in to another service
providing Radio Data System
signals.
• The volume adjustment for traffic
information is automatically
memorised. The next time the unit
switches to traffic information, the
volume is set to the memorised
level.
• The TI Standby Reception can also
be activated or deactivated from
“Radio” source control screen.
(page 26)
• To deactivate, touch [TI] again.
[MODE] Changes the settings for DAB
reception on the <DAB Mode>
screen.
8 Indicators
• TI: Lights up white when receiving the Traffic
Information, and lights in orange when TI
Standby Reception is on standby.
• DAB: Lights up when receiving a DAB broadcast.
• DABMC: Lights up when receiving a DAB multi
component.
• RDS: Lights up when receiving a Radio Data
System signal.
• AUTO1/AUTO2/MANU: Seek mode indicator.
9 Operation keys
[ ]
Displays the <Equalizer> screen
(page 36).
[
]
Displays the <Service List> screen.
[
S]/[T]
Searches for a service.
• The search method differs
according to the selected setting
for [SEEK] (page 22).
[DLS] • Displays Dynamic Label Segment
screen (text messages the service
sends).
23
ENGLISH
00DMX7522DABSX.indb2300DMX7522DABSX.indb23 2022/11/1513:312022/11/1513:31

Kenwood DMX7522DABS Specifications

General

Brand	Kenwood
Model	DMX7522DABS
Category	Monitor
Language	English