Kenwood DMX7522DABS User Manual

<Local>
• ON: Tunes in only to FM stations with sufficient
signal strength. The LO.S indicator lights up.
• OFF (Initial): Deactivates the function.
<Auto TP Seek>
• ON (Initial): Automatically searches for a station
with better reception for Traffic Information if the
reception of the current station is poor.
• OFF: Deactivates the function.
* The volume adjustment for Traffic Information isautomatically
memorised. The next time the unit switches to Traffic
Information, the volume is set to the previous level.
RadioRadio
Other External ComponentsOther External Components
HDMI/AV-IN devices
Connecting external components
See page 52.
Using the HDMI device
When using the HDMI device, you cannot use wireless
Apple CarPlay and wireless Android Auto.
Preparation:
• Select [HDMI] for the <Wireless/HDMI SETUP>
setting when using the HDMI device connected to
the HDMI terminals (page 45).
1 Select [HDMI] as the source.
From the Home screen (page 3), touch as
follows:
• If <Wireless/HDMI SETUP> is not set to [HDMI],
the confirmation screen appears. Touch [HDMI]
and then touch [OK] on the confirmation screen.
2 Turn on the connected HDMI device and
start playing the source.
Using the AV-IN component
Preparation:
• Select [AV-IN] for the <AV Input> setting when
connecting the external AV device to the AV-IN
terminals (page 43).
1 Select [AV-IN] as the source.
From the Home screen (page 3), touch as
follows:
• When selecting [Camera] for the <AV Input>
setting (page 43), you cannot select [AV-IN].
2 Turn on the connected component and
start playing the source.
Video menu control
You can display the video menu control while
watching the video from the external components.
Touch the upper portion of the screen.
28
ENGLISH
00DMX7522DABSX.indb2800DMX7522DABSX.indb28 2022/11/1513:312022/11/1513:31

Kenwood DMX7522DABS Specifications

General

Brand	Kenwood
Model	DMX7522DABS
Category	Monitor
Language	English