ReferencesReferences
About USB Mirroring
• Depending on the connected Android device, you
may need to enable virtual keyboard setting on your
smartphone to display software keyboard on the
screen of this unit and on your Android device.
• The audio may be of poor quality, interrupted or
skipped, depending on several conditions such as
network condition, the application and etc.
• If you perform pairing with another device during
mirroring, mirroring (audio and/or video) will be
disturbed or paused.
• Some Apps may not support audio sharing (no
sound from the background playback source).
• Some operations may not work depending on the
compatibility between this unit, “Mirroring OA for
KENWOOD App” and your Android device.
General
No sound comes out of the speakers.
→ Adjust the volume to the optimum level.
→ Check the cords and connections.
No picture is displayed on the screen.
→ Turn on the screen (page 4).
The unit does not work at all.
→ Initialise the unit (page 45).
The remote controller does not work.
→ Replace the battery.
“No Signal”/“No Video Signal” appears.
→ Start playback on the external component
connected to this unit.
→ Check the cords and connections.
→ Signal input is too weak.
“Miswiring DC Offset Error”/“Warning DC Offset
Error” appears.
→ A speaker cord has shorted or it has come into
contact with the car chassis. Wire or insulate the
speaker cord as appropriate, turn the ignition
switch off then on.
“Parking off” appears.
→ No playback picture is shown when the parking
brake is not engaged.
TroubleshootingTroubleshooting
What appears to be trouble is not always serious.
Check the following points before calling a service
centre.
• For operations with external components, refer also
to the instructions supplied with the adapters used
for connection (as well as the instructions supplied
with the external components).
59
ENGLISH
00DMX7522DABSX.indb5900DMX7522DABSX.indb59 2022/11/1513:312022/11/1513:31
To Next Page
Loading...
Need help?
General
