User’s Manual
Published on February 2017 UMn°154 – rev.05 19
This document and any information disclosed herein are the property of Keopsys and constitutes and contains proprietary information.
Receipt or possession of this document does not confer or transfer any right to duplicate, use disclose any information
Read the booster diode current
set point
Write the booster diode current
set point
See test report for maximum
value
Read the actual booster diode
current
Read the seed laser diode
current set point
Read the seed laser diode
current
Read the seed laser diode
temperature set point
Read the seed laser diode
temperature
Read the seed laser diode
temperature
Power Control & Monitoring (Optional)
Read the nominal output power
Read the output power set point
in APC mode
Write the output power set point
in APC mode
See PON command for
maximum value.
Read the actual input power
Read the actual output power
Read the automatic shutdown
threshold for low input power
Read the automatic shutdown
threshold for low output power
Read the threshold for the
automatic shutdown in case of
high laser diode current
Read the max power available if
the power limitation is activated
Read the max power when
power mute is activated
Read the automatic shutdown
threshold for low case
temperature
Read the automatic shutdown
threshold for high case
temperature
External modulation optional
Read the threshold for low
external modulation frequency
Read external modulation
activated
Write external modulation
activation
Read the duty frequency of the
external modulation
Read the frequency of the
external modulation
To Next Page
Loading...