User’s Manual
Published on February 2017 UMn°154 – rev.05 38
This document and any information disclosed herein are the property of Keopsys and constitutes and contains proprietary information.
Receipt or possession of this document does not confer or transfer any right to duplicate, use disclose any information
8. Warranty
8.1. Default Warranty
This Keopsys product is guaranteed against defects in material and workmanship for 12 months from
the date of shipment. Keopsys will either repair or replace products that prove to be defective.
For warranty or repair, return this product to Keopsys. The buyer will prepay shipping charges to
Keopsys, and Keopsys will pay shipping to return the product to the buyer. However, the buyer will pay all
shipping charges, duties and taxes for products returned to Keopsys from any foreign country.
8.2. Limitation of warranty
WARNING
WARRANTY VOID if the device is opened
• Never use the device to application not described in this manual.
• Never open or modify the product.
• Use the device with properly cleaned connector (refer to safety recommendations when
cleaning the fiber connectors).
• Store and use the device in an ESD free environment for unpacking, assembly, maintenance
and shipment for warranty.
The foregoing warranty will not apply to defects resulting from abuse, misuse, neglect, improper
installation or application by the buyer.
Keopsys will not be responsible for the damage caused to the device as a result of employing dirty or
incompatible fiber connectors.
9. Assistance
Should a problem occur, contact Keopsys. A Return Material Authorization (RMA) number will be issued
for any faulty unit that needs to be returned. Note this number on the shipping container and on all
correspondence.
For assistance, or before any shipments, please contact Keopsys: