Press and hold the TARE and ON/OFF buttons
simultaneously to enter the setup menu.
Wait until the first menu item < Cal > is displayed.
Confirm by ➔ button, < CalExt > will be displayed.
Confirm by pressing the ➔-key, the first selectable
adjustment weight is displayed.
Use the navigation keys to select the desired
adjustment weight, see chap. 1 „Adjustment points“ or
„Recommended adjustment weight“ Numerical input, see
chap. 3.2.2
Prepare the required adjustment weight.
Acknowledge selection by ➔-button. <Zero >,<Pt ld >
followed by the weight value of the adjustment weight to be
placed will be displayed.
To Next Page
Loading...
