KERN CDS 4K0.02 User Manual

25 TCDS-BA-e-2210
9 Application <Counting>
9.1 Application-specific settings
Call up menu:
 Press the TARE key and hold it until<apcmen> is displayed.
 The display changes to <coumod> followed by <ref>.
 Navigation in menu see chap. 10.1
Overview:
Level 1
Level 2
Description / Chapter
Ref :
Reference
quantity
5
Reference quantity 5
10
Reference quantity 10
20
Reference quantity 20
50
Reference quantity 50
free
Optional, numeric input, see chap.
3.2.2.
input
Input piece weight
Ptare
PRE-TARE
actuAl
Take over the placed weight as PRE-
TARE value, see chap. 9.2.4
manuAl
Numerical input of the tare weight, see
chap. 9.2.5
CLEAR
Delete PRE-TARE value
Unit
Units
available weighing units,
see chap. 1
This function is used to define which
weighing unit is to be used in the
weighing balance.
Free factor
Multiplication factor
Check
Check
counting
target
value
Target value entry
errupp
Upper tolerance
errlow
Lower tolerance
reset
Reset settings to factory defaults
limit
limupp
Upper limit value for target piece
quantity, numeric input see chap. 3.2.2
limlod
Lower limit value for target piece
quantity, numeric input see chap. 3.2.2
reset
Reset settings to factory defaults

KERN CDS 4K0.02 Specifications

General

Brand	KERN
Model	CDS 4K0.02
Category	Scales
Language	English