23 TCDS-BA-e-2210
8.3 Taring
The dead weight of any weighing container may be tared away by pressing a button,
so that the following weighing procedures show the net weight of the goods to be
weighed.
Put weighing container on the weighing pan.
Wait until the stability display appears ), then
press TARE key. The weight of the container is now
internally saved. Zero display and indicator <NET>
will appear.
<NET> informs that all shown weight values are net
values.
• When the balance is unloaded the saved taring value is displayed with
negative sign.
• To delete the stored tare value, unload the weighing plate and press the
TARE key or the ZERO key.
• The taring process can be repeated any number of times, e.g. when adding
several components for a mixture (adding). The limit is reached when the
taring range capacity is full.
• Numerical input of tare (PRE-TARE)
To Next Page
Loading...
Need help?
General
