KERN CDS 4K0.02 - External Adjustment with User-Defined Adjustment Weight < Caleud

TCDS-BA-e-2210 18
 Place the adjustment weight and confirm with ➔-button,
< wait > followed by < reMvld > will be displayed.
 Once < reMvld > is displayed, remove the adjustment
weight.
 After successful adjustment the balance automatically
returns to weighing mode.
In case of an adjustment error (e.g. objects on the weighing
plate) the display will show the error message < wrong>.
Switch off balance and repeat the adjustment process.
7.8.2 External adjustment with user-defined adjustment weight < caleud >
 Press and hold the TARE and ON/OFF buttons
simultaneously to enter the setup menu.
 Wait until the first menu item < Cal > is displayed.
 Confirm by ➔ button, < CalExt > will be displayed.
 Use the navigation keys to select   < caleud >.
 Acknowledge by ➔-button. The numeric input window for
the weight value of the adjustment weight appears. The
active digit is flashing.
 Provide adjustment weight.
 Enter weight value, numeric input see chap. 3.2.2