KERN CDS 4K0.02 - Target Counting

31 TCDS-BA-e-2210
9.2.6 Target counting
The <Target counting> application allows weighing of goods within set tolerance
limits in keeping with a determined target quantity.
Reaching the target weight is indicated by an acoustic (if activated in menu) and an
optic signal (tolerance marks).
Reaching the target value is indicated by an acoustic (if activated in menu) and an
optic signal (tolerance marks ).
Optical signal:
The tolerance marks provide the following information:
Target quantity exceeds defined tolerance
Target piece quantity
Target quantity below defined tolerance
Acoustic signal:
The acoustic signal depends on the menu setting
< setup  beeper >, see chap. 10.3.1.