KERN CDS 4K0.02 - Automatic Data Output < Auto; Continuous Data Output < Cont

TCDS-BA-e-2210 48
11.2.3 Automatic data output < auto >
Data output happens automatically without having to press the PRINT-key as soon
as the corresponding output condition has been met, dependent on the setting in the
menu.
Enable function and set the output condition:
 In Setup menu invoke the menu setting < Print  PrMode  trig >
and confirm with ➔ button.
 For an automatic data output select the menu setting < auto > using the
navigation keys  and confirm by the ➔ button.
 Use the navigation keys  to select the setting < on > and confirm on ➔
button. < zRange> is displayed.
 Acknowledge by ➔-button and set the required output condition with the
navigation keys .
 Acknowledge by ➔-button.
 To exit the menu press the navigation key  repeatedly.
Place goods to be weighed on balance:
 If required, place empty container on scale and tare.
 Place weighed goods and wait until the stability display ( ) appears.
The weighing value is issued automatically.

11.2.4 Continuous data output < cont >
Enable function and set the output interval:
 In Setup menu invoke the menu setting < Print  PrMode  trig >
and confirm with ➔ button.
 For a continuous data output select the menu setting < cont > using the
navigation keys  and confirm on ➔ button.
 Use the navigation keys  to select the setting < on > and confirm on ➔
button.
 < speed > is displayed.
 Acknowledge with the ➔-button and set the required time interval with the
navigation keys  (numeric input see chap. 3.2.2)
 <Zero> & <Stable> set the required output condition.
 To exit the menu press the navigation key  repeatedly.
Place goods to be weighed on balance
 If required, place empty container on scale and tare.
 Place goods to be weighed.
 The weighing values are issued according to the defined interval.