KERN CDS 4K0.02 - Page 3

TCDS-BA-e-2210 2
7.8 Adjustment .................................................................................................. 16
7.8.1 External adjustment < CalExt > ................................................................17
7.8.2 External adjustment with user-defined adjustment weight < caleud > .......18
7.8.3 Gravitational constant adjustment location < graadj > ..............................20
7.8.4 Gravitational constant adjustment location < grause > ..............................21
8 Basic Operation ................................................................................................. 22
8.1 Turn on/off ................................................................................................... 22
8.2 Simple weighing .......................................................................................... 22
8.3 Taring .......................................................................................................... 23
8.4 Under-floor weighing (optional, varies by model) ........................................ 24
9 Application <Counting> ...................................................................................... 25
9.1 Application-specific settings ........................................................................ 25
9.2 Using the application ................................................................................... 26
9.2.1 Piece counting.................................................................................................26
9.2.2 Counting with reference quantity 5, 10 or 20. ..................................................26
9.2.3 Count with freely selectable reference quantity < FrEE >. ............................28
9.2.4 Take over the placed weight as PRE-TARE value ...........................................29
9.2.5 Enter the known tare weight numerically < PtaremanuAl > ................30
9.2.6 Target counting ...............................................................................................31
9.2.7 Check counting ...............................................................................................34
9.2.8 Weighing with multiplication factor...................................................................37
10 Menu ............................................................................................................... 38
10.1 Navigation in the menu............................................................................. 38
10.2 Application menu ...................................................................................... 38
10.3 Setup menu .............................................................................................. 39
10.3.1 Overview < setup > ...................................................................................39
11 Communication with peripheral devices via KUP connection ......................... 43
11.1 KERN Communications Protocol (KERN Interface Protocol) ................... 44
11.2 Issue functions ......................................................................................... 45
11.2.1 Add-up mode < sum > ...................................................................................45
11.2.2 Data output after pressing the PRINT button <manual> ............................47
11.2.3 Automatic data output < auto > ...................................................................48
11.2.4 Continuous data output < cont > .................................................................48
11.3 Data format .............................................................................................. 49
12 Servicing, maintenance, disposal ................................................................... 50
12.1 Cleaning ................................................................................................... 50