KERN CFS 300-3 - Page 145

58 CFS/CCS-BA-e-1624
5. Zero adjustment range
Range of loads in which the display will be set to zero after activation.
„0 AUto“
 Press on display „0 AUto“; the current adjustment will be
shown.
Select desired setting by and confirm with , the
balance returns to the menu.
 Select the next menu point „0 manl“ with .
Adjustments are only
possible on the
reference scale.
6. Manual zero tracking
Range of loads in which the display will be set to zero after
actuation of the zero key.
„0 mAnL“
 Press , the current setting will be displayed.
Select desired setting by and confirm with , the
balance returns to the menu.
 Select next menu point „Pin“ with .

„0 mAnL“ „2“

„Pin“
7. Password for menu access „tECH“
„Pin“
 Press and input new password with numeric keys.
Confirm with and repeat password input.
 Confirm with , the scale will return to its menu. On
successful input, „donE“ will be displayed; „FAIL“ will be
displayed on faulty input. Repeat input in this case.

Select the next menu point „GrA“ with .

„Pin1“ „----„

„Pin2“ „----„
„donE“
8. Local gravitation constant „GrA“
Not documented
Adjustment or linearization must be done after configuration.
Implementation of adjustment cf. chapter 14 / linearization cf. chapter 15.