30 KXS_KXG-TM-BA_IA-e-1932
Automatic reference optimization
• Menu setting:
„P4 OTH“ „AVErG“ „on““, see chap. 11
In order to improve the counting exactness, the reference can be optimised by
adding more pieces. At every reference optimisation, the reference weight is
calculated anew. As the additional pieces increase the base for the calculation, the
reference also becomes more exact.
If the number of placed parts are 5 pieces more than the reference, then the
automatic reference optimisation starts. The reference weight is calculated anew.
To Next Page
Loading...
