44 KXS_KXG-TM-BA_IA-e-1932
Counting to target quantity
Determine the item weight, see chap. 10.1
Tare when using a weighing container.
Put on goods to be weighed, tolerance control is started. The indicators show
whether the load is within the two set tolerance limits.
Weighed load below
specified tolerance
Weighed load within
specified tolerance
Weighed load exceeds
specified tolerance
Indicator will be
displayed
Indicator will be
displayed
Indicator will be
displayed
• The tolerance control is not active when the weight is under 20d.
• To delete limits, enter „000000 PCS“.
To Next Page
Loading...
