20 KXS_KXG-TM-BA_IA-e-1932
For linearization press to select setting < LinEr>, to confirm, press .
Ensure that there are no objects on the weighing pan.
Wait for stability display, then press .
When “Ld 1“ is displayed, put the first adjustment weight (1/3 max) carefully in the
centre of the weighing platform. Wait for stability display, then press .
When “Ld 2“ is displayed, put the second adjustment weight (2/3 max) carefully in
the centre of the weighing platform. Wait for stability display, then press .
When “Ld 3“ is displayed, put the third adjustment weight (max) carefully in the
centre of the weighing platform. Wait for stability display, then press .
After the adjustment the balance will carry out a self-test.
Remove adjustment weight during selftest, balance will return into weighing
mode automatically.
To Next Page
Loading...
