26
For example: for a family of three people who go out early
and come home late without anyone at home in the daytime,
battery can work about 24 months; for places with large
people flow every day, such as stores, battery standby time
will be much shorter.
How long can the
PIR motion motion detector
detector battery work ?
For example: for a family of three people who go out early
and come home late without anyone at home in the daytime,
battery can work about 24 months; for places with large
people flow every day, such as stores, battery standby time
will be much shorter.
The detector is with battery installed, which can work for
about 12-24 months.
How long can the
door/window detector
battery work ?
How long can the alarm hub
backup battery stand by
during AC power failure ?
The alarm hub backup battery can stand by 4 to 12 hours
depending on the actual working status, if the system is
trigged during AC power failure,and the alarm hub keeps
ringing it internal siren and sending notification, SMS and
making phone calls to phone numbers, the backup time can
be much shorter.
The detector is with batteries installed, which can work for
about 12-24 months.
No SMS notification when
hub is arming or disarming:
1.Please make sure your arm/disarm SMS notification switch is on.
2.Please make sure alarm notification numbers are stored and turned on.
Mobile phones cannot
control panel remotely:
1.Please make sure phone number is set as system alarm number.
2.Please make sure SIM card is with enough balance credit.
The meaning of
SM icon indicator
1.“X”in Grey indicates that hub has not detected GSM SIM
card or no SIM signal around, please move to location with
strong signal, re-insert SIM card and turn on hub again.
2.Grey means that hub is detecting SIM card signal.
3.White shows that hub has detected GSM signal.
Alarm phone numbers
already set via APP,but
phone call or SMS received
when system alarms
1.Please confirm that your phone number is input correctly
in the list of alarm numbers.
2.Please confirm that switch of alarm call and SMS
notification are turned on.
App is failed to be
airlinked with hub:
1.Please make sure that hub and airlinking mobile phone are
in same WiFi network.
2.Please confirm data transmission of network connection is normal.
3.Please confirm WiFi network is 2.4G, currently 5G WiFi
is not supported.
4.The APP airlink configuration should be simultaneous with
hub airlink configuration
5.Do not touch mobile phone screen during configuration.
6.Please close APP completely and restart configuration.
The hub cannot be controlled
remotely after successfully
binded to mobile phone APP:
1.Please confirm network connection is available.
2.Please close App and open it again.
To Next Page
Loading...
