User Manual
SUPM1
page 27 of 94© KEYMILE December 2015 EN/LZTBU 372 129/1 RC
94
Installation
4 Installation
4.1 Prerequisites
Before installing a SUPM1 unit take care to follow the safety advices as
listed in [202] Safety Instructions “Precautions and safety”.
Valid combinations of hardware (HW) and embedded software (ESW) ver-
sions are given in [012] Release Note “XMC20”.
For the installation of XMC20 HW
refer to [301] User Guide “XMC25 Installation”, or
refer to [310] User Guide “XMC23 Installation”, or
refer to [322] User Guide “XMC22 Installation”.
The XMC22 subrack is not available in the system release R4C.
To Next Page
Loading...