Keysight 16452A Liquid Test Fixture 17
Initial Inspection
Repackaging the Test Fixture For Shipment
Repackaging the Test Fixture For Shipment
If shipment to aKeysight Technologies service center is required, each test
fixture should be repackaged using the original factory packaging materials.
If this material is not available, comparable packaging materials may be used.
Wrap the liquid test fixture in heavy paper and pack in anti-static plastic
packing material. Use sufficient shock absorbing material on all sides of the
16452A to provide a thick, firm cushion and to prevent movement. Seal the
shipping container securely and mark it FRAGILE.
To Next Page
Loading...