20 Keysight 16452A Liquid Test Fixture
Operation
Introduction
3-
Measurement Requirements
To do the measurement, the following items are required:
• 16452A Liquid Test Fixture
• Fixture stand (furnished with the 16452A)
• SMA-BNC adapter (furnished with the 16452A)
• Measurement cable (16048A or 16048G/H + 1250-2375)
• 1.3 mm spacer for the SHORT compensation (furnished with the 16452A)
• Shorting plate for the SHORT compensation (furnished with the 16452A)
• A spacer (choose one of the furnished four spacers)
• Measurement instrument (LCR Meter/Impedance analyzer with 4 terminal
pair)
• Liquid under test (enough for the spacer you are using)
In addition, the following items are useful:
• For washing the 16452A, a brush, detergent, cloth, etc.
• For high temperature measurements, gloves to prevent scalding.
To Next Page
Loading...