Keysight Technologies 6811C User Manual

40 Keysight Models 6811C, 6812C, and 6813C Quick Start Guide
Program a protection
function
1 Press then .
2 Enter the respective
current using the keypad
of the Entry key group.
3 Press [Enter].
4 Press ▲ or ▼ of the
Function key group until
the display shows
CURR:PROT.
5 Press ▲ or ▼ of the Entry
key group until the display
shows CURR:PROT ON.
6 Press [Enter].
Clears all previously set protection functions and then set the current
protection, which disables the output when an overcurrent condition is
detected. The OCP annunciator will light when this command is
programmed.
Access ac source information
1 Press then .
2 Press ▲ or ▼ of the
Function key group to
access the ac source basic
information.
Displays ac source basic information such as model, option, serial
number, firmware revision, media access control (MAC) address, USB
vendor identification (VID), and USB product identification (PID).
View LAN information
1 Press then .
2 Press ▲ or ▼ of the
Function key group to
access the LAN
information.
Displays LAN information such as LAN status, DHCP, auto DNS, MDNS,
IP, subnet, gateway, DNS l, DNS 2, hostname, and domain name.
Reset LAN
1 Press then .
2 Press ▲ or ▼ of the Entry
key group until the display
shows CONFIRM? YES.
3 Press [Enter].
Resets the LAN configuration to factory default conditions.
Action, key press, or display Result
0 V
overcurrent detected

Keysight Technologies 6811C Specifications

General

Brand	Keysight Technologies
Model	6811C
Category	Measuring Instruments
Language	English