18 LCR Meter
1 Installation
Checking the Shipment
After you receive the meter, carry out checks during
unpacking according to the following procedure.
Step 1. Check that the packing box or shock- absorbing
material used to package the meter has not been damaged.
Step 2. Check the packaged items supplied with the meter
for any damage or defects.
Step 3. By referring to the furnished contents list, check
that all packaged items supplied with the meter have been
received as per the specified options.
Step 4. After checking, if one of the following applies,
contact your nearest Keysight Technologies sales and service
office.
1 The packing box or shock- absorbing material used to
package the meter has been damaged or the
shock- absorbing material has traces where extreme force
has been applied.
2 A packaged item supplied with the meter has mechanical
damage or defects.
3 A packaged item supplied with the meter is missing.
4 A fault has been detected in the subsequent operation
check of the meter.
If an abnormality is detected in step 1, contact the
company that transported the meter as well as your
nearest Keysight Technologies sales and service office. For
When unpacking the meter, if the exterior of the meter (such as
the cover, front/rear panel, LCD screen, power switch, and port
connectors) appear to be damaged during transport, do not turn
on the power switch. Otherwise, you may get an electric shock.
If the packing box or shock-absorbing material has been damaged, leave the
packing box and shock-absorbing material as is until other inspection items
are checked as follows.
To Next Page
Loading...
Need help?
General
