22 LCR Meter
1 Installation
Ensuring Adequate Free Space around Meter for Immediate
Disconnection of Power Cable in Case of Emergency
As described in “Disconnection from Supply Source" on
page 36, the power supply is disconnected by removing the
power cable’s connector plug from either the AC outlet or
the E4982A unit. When installing the E4982A, ensure that
there is sufficient free space around the unit to permit quick
disconnection of the plug (from AC outlet or E4982A unit) in
case of emergency.
Figure 2 Example of the static-safe work station
To Next Page
Loading...
Need help?
General
