Keysight Technologies InfiniiVision 3000 X Series User Manual

398 Keysight InfiniiVision 3000 X-Series Oscilloscopes User's Guide
26 I2S Triggering and Serial Decode
2 In the Search Menu, press the Search softkey; then, turn the Entry knob to select
the serial slot (Serial 1 or Serial 2) on which the I2S signals are being decoded.
3 In the Search Menu, press Search; then, select from these options:
• = (Equal) — finds the specified audio channel's data word when it equals the
specified word.
• != (Not Equal) — finds any word other than the specified word.
• < (Less than) — finds when the channel's data word is less than the specified
value.
• > (Greater than) — finds when the channel's data word is greater than the
specified value.
• >< (In Range) — enter upper and lower values to specify the range to find.
• <> (Out of Range) — enter upper and lower values to specify range not to find.
• Errors — finds all errors.
For more information on searching data, see "Searching Lister Data" on page 126.
For more information on using the [Navigate] key and controls, see "Navigating the
Time Base" on page 60.

Keysight Technologies InfiniiVision 3000 X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 3000 X Series
Category	Test Equipment
Language	English