104 Keysight InfiniiVision 3000 X-Series Oscilloscopes User's Guide
5 Reference Waveforms
2 Press the Skew softkey and turn the Entry knob to adjust the reference
waveform skew.
To display reference waveform information
1 Press the [Ref] key to turn on reference waveforms.
2 In the Reference Waveform Menu, press the Options softkey.
3 In the Reference Waveform Options Menu, press the Display Info softkey to
enable or disable reference waveform information on the oscilloscope display.
4 Press the Transparent softkey to enable or disable transparent information
backgrounds.
This setting is also used for other oscilloscope information on the display, like
mask test statistics, etc.
To save/recall reference waveform files to/from a USB storage
device
Analog channel, math, or reference waveforms can be saved to a reference
waveform file on a USB storage device. See "To save reference waveform files to a
USB storage device" on page 279.
You can recall a reference waveform file from a USB storage device into one of the
reference waveform locations. See "To recall reference waveform files from a USB
storage device" on page 282.
To Next Page
Loading...
