Keysight Agile Signal Generator Service Guide 59
Replaceable Parts
Frequency and Hardware Options
The following options are available with the Keysight X-Series signal
generators.
Frequency Options
N5191A N5193A
52E 520 10 MHz to 20 GHz frequency range
54E 540 10 MHz to 40 GHz frequency range
Hard ware Options
N5191A N5193A
1ED 1ED Type-N (f) RF output connector
1EM 1EM Move all connectors to rear panel
AT2 AT2 Add mechanical + solid state attenuator assembly
CA1 CA1 LVDS cable, 1.5m length)
CA2 CA2 BCD cable, 1.5m length
CC1 CC1 100-pin I/O interface (for binary input)
CC2 CC2 80-pin I/O interface (for BCD input)
FR1 FR1 0.001 Hz frequency resolution
PM2 PM1 Pulse modulation
n/a SS1 1 microsecond switching speed
n/a SS4 180 nanosecond switching speed
SS3 n/a 180 nanosecond switching speed to 6.89 GHz
SSD SSD Additional removable solid state drive
UT1 UNT AM, FM, phase modulation, LF output, and narrowband chirp
WC2 WC1 Wideband chirp
To Next Page
Loading...
Need help?
General
