Keysight Agile Signal Generator Service Guide 67
Replaceable Parts
Hardware
This section lists part numbers for hardware and other instrument parts in your
signal generator.
— “Front Panel” on page 68
— “Rear Panel” on page 69
— “Assemblies and Cables”
— "Major Assemblies" on page 70
— "Microdeck Assemblies" on page 71
— "Outer Instrument Cover and Associated Parts" on page 72
— "Bottom Covers" on page 73
— "Rear Panel Assemblies" on page 74
— "Fan Module" on page 75
— "Motherboard" on page 76
— "Midplane Board" on page 77
— "CPU Board Assemblies" on page 78
— "DAC/Reference Assemblies" on page 79
— "Microdeck Cables Option 520/52E, UNM" on page 80
— "Microdeck Cables Option 520/52E, AT1/AT2, UNM" on page 81
— "Microdeck Cables Option 540/54E, UNM" on page 82
— "Microdeck Cables Option 540/54E, AT1/AT2, UNM" on page 83
— "Line Module" on page 87
— "Front Panel Cables" on page 88
— "Front Panel Cables to Microdeck" on page 88
— "1EM Cables - Option 520/52E" on page 84
— "1EM Cables - Option 540/54E" on page 85
— "Microdeck Ribbon Cables" on page 86
To Next Page
Loading...
Need help?
General
