1 Introduction
Connector Care
Damage to N1000A electrical and fiber-optic input connectors can cost
thousands of dollars, not to mention lost time! To learn how to avoid damaging
the connectors, read the Connector Care topics located in the Help.
1. Turn on the N1000A and click Help > User's Guide to open the help.
2. On the help's menu, click Quick Start > Optical Connectors or Electrical Con-
nectors.
If flammable fluids are used to clean connectors, the fluid shall not be placed
on the instrument during use or when connected to mains voltage. Cleaning
the connectors shall take place in ventilated area to allow fluid vapors to
dissipate, and reduce the risk of fire.
Cleaning connectors with alcohol shall only be done with the instruments
power cord removed, and in a well-ventilated area. Allow all residual alcohol
moisture to evaporate, and the fumes to dissipate prior to energizing the
instrument.
N1000A Quick Start Guide 11
To Next Page
Loading...
Need help?
General
