1 Introduction
N1000A Includes a PC
The N1000A includes a built-in PC that is running Windows 10. The N1000A’s
FlexDCA Graphical User Interface (GUI) is the same Windows application as the
N1010A FlexDCA Remote Access Software. The N1000A includes many of the
standard PC connectors on the instrument’s rear-panel as shown in the
following figure.
Figure 2. Rear-Panel Connectors
As with any computer, you should consider the following points to maintain
security and protect your N1000A:
n
Install Windows security updates as soon as they become available.
n
Consider installing anti-virus software.
n
When connected to the LAN, avoid visiting web sites or downloading mater-
ial that are not completely secure and trusted.
n
Never connect a pen drive or external memory device to the N1000A that
has not been tested for viruses or malware.
n
Follow the advice of you company’s IT department.
n
For N1000A firmware upgrades, go to
https://www.keysight.com/find/flexdca_download.
6 N1000A Quick Start Guide
To Next Page
Loading...
Need help?
General
