Keysight DCA-X Series User Manual

2 Installing the N1000A
Step 4. Install the Modules
1. Slide your modules into the front-panel module bay. Single-slot modules
can be installed in any of the four slots. Two-slot modules can be installed in
slots 1/2 or 3/4 but not 2/3. Three-slot modules can be installed in slots
1/2/3 only.
2. While gently pressing on the top inch of the module’s front panel, finger
tighten the knurled locking screws.
Figure 8. Installing a Module
N1000A Quick Start Guide 25

Keysight DCA-X Series Specifications

General

Brand	Keysight
Model	DCA-X Series
Category	Test Equipment
Language	English