2 Installing the N1000A
Step 9. Install a Feature License (Optional)
If you ordered an optional license with your N1000A, it was probably installed at
the factory. If you ordered it, but it wasn’t installed, you received a Software
Entitlement Certificate that you must use to install the license on your N1000A.
Refer to the instrument’s help system for information on installing licenses.
Step 10. Connect a Printer (Optional)
You can connect a printer to the N1000A’s LAN or USB ports. Support for most
printers will automatically be installed when the instrument is first turned on.
For other printers, use Windows to add the printer.
Figure 14. Location of Printer Ports
N1000A Quick Start Guide 31
To Next Page
Loading...
