2 Installing the N1000A
Step 3. Position the N1000A
Position the N1000A so that it will have sufficient clearance for airflow around
the top, back, and sides. Review Table 2 to confirm that your operating or
storage environment is suitable for the instrument.
Use Keysight supplied power cord or one with same or better electrical rating.
Safety of any system incorporating the equipment is the responsibility of the
assembler of the system.
Item Description
Use indoor
Temperature
Operating 10°C to +40°C (50°F to +104°F)
Non-operating –40°C to +70°C (–40°F to +158°F)
Altitude (Operating) Up to 4,600 meters (15,000 ft)
Humidity
1
Type tested at 95%, +40°C (non-condensing)
Weight
Mainframe without modules (characteristic) 20.5 kg (43 lb)
Module (characteristic) 1.2 kg (2.6 lb)
Dimensions (excluding handle)
Without front connectors and rear feet 221 mm H x 426 mm W x 530 mm D
(8.7 inch x 16.76 inch x 20.9 inch)
With front connectors and rear feet 234 mm H x 426 mm W x 601 mm D
(9.23 inch x 16.76 inch x 23.67 inch)
With front cover and rear feet 234 mm H x 426 mm W x 612 mm D
(9.23 inch x 16.76 inch x 24.1 inch)
Table 2. N1000A Environmental Specifications
1. Samples of this product have been type tested in accordance with the Keysight Environmental Test Manual
and verified to be robust against the environmental stresses of Storage, Transportation and End-use; those
stresses include but are not limited to temperature, humidity, shock, vibration, altitude and power line con-
ditions. Test Methods are aligned with IEC 60068-2 and levels are similar to MIL-PRF-28800F Class 3.
N1000A Quick Start Guide 23
To Next Page
Loading...
