Getting Started Guide 81
Test Platform Operating System
Updating the Keysight 5G NR Test Application
Once the application software has been installed, you must follow the
instructions provided in “Licensing” on page 37 in order to install the license
required (if not previously installed), and select and start up the application as
described in the procedure “Turning On the Test Platform the First Time” on
page 31.
Installation of Third Party Software
It is recommended that you do not install any software not provided by
Keysight, unless the Keysight installer instructs you to add it. Installation of
third party software on the UXM 5G may render the system inoperative and is
not supported by Keysight Technologies.
To Next Page
Loading...
